null

Rockford Fosgate P3 and R2-1200X1 amplifier package

$1,999.99

or make 4 interest-free payments of $500.00 NZD fortnightly with Afterpay More info

(No reviews yet) Write a Review

Dual 12" subwoofer and amplifier Combo 1200W RMS Amplifier and subwoofer specifications below..

 

The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded enclosures are constructed with durable 5/8" MDF and tuned by our computer aided design software. P3 Loaded Enclosures feature similar tonal performance as P2 & P1 models, but with higher power handling capacity.

 

  • Proprietary high-flow, low-noise port
  • Constructed with 5/8" MDF
  • High current binding posts
  • 1 Year Warranty
Woofer Quantity
2
Woofer Size
12"
Woofer Series
Punch P3 (P3D4-12)
Nominal Impedance (ea)
1-Ohm
Internally wired to create a 1-Ohm amplifier load
Power Handling (Watts RMS)
1200 Watts RMS
2400 Watts Max
Enclosure Type
Vented
Enclosure Material
5/8" MDF (Medium Density Fiberboard)
Speaker Connector
Up to 10 AWG compression terminals
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)
 
Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2)
15.125" x 33.875" x 15.75"
(38.4cm x 86cm x 40cm)
Shipping Weight
89.65 Lbs. (40.66 kg)
 

The R2 models are developed for car audio fanatics that want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. These 3rd generation of Prime Series amplifiers are refined with the latest Rockford Fosgate technology for easy setup and configuration, making them perfect for use with factory audio or custom aftermarket systems.

 

  • Balanced Differential Inputs with RCA Pass Through Outputs
  • High Level Input Capable
  • Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
  • Features C.L.E.A.N. Set-up
  • Variable Input Gain adjustment level
  • Includes RLC Remote Level Control
  • Variable Infrasonic Filter
  • Continuously Variable On Board Punch EQ
  • Top Mounted Control Panel
  • Short Circuit & Over Current Protection
  • CEA-2006 Compliant & CE Compliant
  • Cast aluminum heat sink
  • Class-D Topology
  • Rollback Protection
  • Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
  • 1 Year Warranty
CEA-2006 Compliant
CEA-2006 GuidelinesCEA-2006 Power Rating
400W x 1 @ 4Ω
≤1.0% THD+N
Cta-2006 Compliant
 
Number of Channels
1
Total Power
(Sum of Rated Power)
1200 Watts
Rated Power
(RMS Continuous Power)
400 Watts x 1 @ 4Ω
800 Watts x 1 @ 2Ω
1200 Watts x 1 @ 1Ω
Dynamic Power
(PVC/PowerCube®)
489 Watts x 1 @ 4Ω
889 Watts x 1 @ 2Ω
1389 Watts x 1 @ 1Ω
Bridgeable
No
Frequency Response
20 Hz - 250 Hz
Input Sensitivity
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Circuit Topology Class
Class-D
Efficiency (average)
> 80%
Total Harmonic Distortion (THD+Noise)
4Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%
Signal Input
Low-Level: 2 RCA
High-Level: 4-Pin Molex
Signal Output
Low-Level: 2 RCA
(Pass-Thru active with RCA or Hi-Level input)
Tone Controls
0 to +18 dB @ 45 Hz
Crossover Controls
Low-Pass:
50 Hz - 250 Hz @ 12dB/Octave Butterworth

Infrasonic:
15 Hz - 40 Hz @ 12dB/Octave Butterworth
Remote Controls
Yes
Visual Indicators
Power/Protect
C.L.E.A.N. In
C.L.E.A.N. Out
Power Wire Gauge
4 AWG
Power Input Connector
Compression Terminal Block
Speaker Wire Gauge
8 AWG
Speaker Output Connector
Compression Terminal Block
Cooling
Convection
Heatsink
 
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
200 A
Average Current Draw (13.8V Music)
 
Max. Current Draw (13.8V Sinewave)
121 A
Suggested Alternator
 
Dimensional Diagram
 
Dimensions (H x W x D)
1.9" x 6.8" x 11.3"
(4.9 cm x 17.3 cm x 28.5 cm)
 

or make 4 interest-free payments of $500.00 NZD fortnightly with Afterpay More info